2.2.4 New Features and Changes

From PFSenseDocs
Jump to: navigation, search


Security/Errata Notices

  • pfSense-SA-15_07.webgui: Multiple Stored XSS Vulnerabilities in the pfSense WebGUI
    • The complete list of affected pages and fields is listed in the linked SA.
  • FreeBSD-SA-15:13.tcp: Resource exhaustion due to sessions stuck in LAST_ACK state. Note this only applies to scenarios where ports listening on pfSense itself (not things passed through via NAT, routing or bridging) are opened to untrusted networks. This doesn't apply to the default configuration.
  • Note: FreeBSD-SA-15:13.openssl does not apply to pfSense. pfSense did not include a vulnerable version of OpenSSL, and thus was not vulnerable.
  • Further fixes for file corruption in various cases during an unclean shut down (crash, power loss, etc.). #4523
    • Fixed pw in FreeBSD to address passwd/group corruption
    • Fixed config.xml writing to use fsync properly to avoid cases when it could end up empty. #4803
    • Removed the 'sync' option from filesystems for new full installs and full upgrades now that the real fix is in place.
    • Removed softupdates and journaling (AKA SU+J) from NanoBSD, they remain on full installs. #4822
  • The forcesync patch for #2401 is still considered harmful to the filesystem and has been kept out. As such, there may be some noticeable slowness with NanoBSD on certain slower disks, especially CF cards and to a lesser extent, SD cards. If this is a problem, the filesystem may be kept read-write on a permanent basis using the option on Diagnostics > NanoBSD. With the other above changes, risk is minimal. We advise replacing the affected CF/SD media by a new, faster card as soon as possible. #4814
  • Upgraded PHP to 5.5.27 to address CVE-2015-3152 #4832
  • Lowered SSH LoginGraceTime from 2 minutes to 30 seconds to mitigate the impact of MaxAuthTries bypass bug. Note Sshlockout will lock out offending IPs in all past, current and future versions. #4875

Certificates

  • Changed the built-in certificate manager to specify keyUsage and extendedKeyUsage in certificates. Windows will now correctly function with IKEv2 using certificates from the built-in certificate manager without disabling EKU. #4580
    • Note: This change applies only to new certificates, created on 2.2.4 or newer, and the CN of the certificate must match the hostname or IP address to which clients connect.
  • Added authorityKeyIdentifier to CRLs generated by the built-in certificate manager. (strongSwan requires it to match.) #4860

IPsec

  • Fixed non-GCM AES modes with AES-NI enabled. #4791
  • Fixed issues with keyid and some mobile IPsec identifiers. #4811 #4806
  • Fixed includes so PHP shell session restartipsec script works.
  • Fix dashboard hardware crypto display where AES-NI is enabled. #4809
  • Fixed issues with IPsec with certificates/ASN1.DN. #4792 #4794
  • Added code to write out CRLs from the built-in certificate manager for use by strongSwan.
  • Added option for enabling Strict CRL Checking (strictcrlpolicy in strongSwan config).
  • Fixed saving Advanced IPsec options before IPsec is enabled.
  • Changed LAN bypass to be from "LAN subnet" to "LAN subnet" rather than from "LAN subnet" to "LAN address" to allow it to work for VIPs on the interface.
  • Remove "Auto" key exchange option, and change upgraded configurations to IKEv2. #4873
  • Specify rightid for mobile IPsec non-PSK configurations. Add peer ID option "any" for excluding peer identifier checks for mobile IPsec circumstances where peer ID matching is impossible or undesirable.

OpenVPN

  • Fixed handling of OpenVPN automatic stop/start when bound to gateway groups using CARP VIPs. #4854

DHCP

  • Fixed issues with IPv6 Prefix Delegation caused by an invalid prefix/subnet check added to the ISC DHCP daemon. Reported upstream and patched the checks out in FreeBSD ports. #4829

DNS Resolver

  • Changed Unbound to use interface-automatic where interface list is empty so it replies correctly in a default HA configuration. #4807
  • Fixed selection of a CARP VIP for outgoing interface. #4852
  • Fixed some inconsistencies in text across the GUI in places that specified DNS Forwarder vs. Resolver. #4551

Load Balancer

  • Improved handling of port ranges in relayd. #4810
  • Fixed references to Load Balancer Virtual Server redirect_mode.

Traffic Shaping

  • Fixed adding of VoIP rules from traffic shaper wizard where IP/alias was not specified. #4838
  • Fixed default CoDel values.
  • Corrected inverted target/interval values for CoDel.

Rules/NAT/Aliases

  • Fixed a foreach() error when saving an empty alias.
  • Fixed input validation on Alias import page.
  • Fixed inconsistencies in descriptions in Alias editing for URL Table aliases.
  • Added labels to more default firewall rules.
  • Avoid an error loading the rules with a numeric hostname in an alias.

Misc

  • Removed unnecessary deletion of rc.conf; Added an empty rc.conf with a note.
  • Removed a check for a QinQ interface existing when deleting. The check unnecessarily made QinQ un-deletable where the parent interface no longer existed.
  • Fixed GratisDNS support.
  • Fixed glob for serial devices to match more accurately.
  • Fixed a foreach() warning when editing PPP entries.
  • Fixed GRE and GIF interface input validation so required fields and descriptions match.
  • Changed the behavior of Cancel buttons to be consistent (return to referring page).
  • Fixed display of advanced DHCP settings when present.
  • Removed old, unused NetUtils.js.
  • Retain /usr/bin/fsync from FreeBSD in images.
  • Added "netstat -ni" to /status.php output.
  • Fixed a typo in upgrade code for Captive Portal.
  • Fixed limiter upgrade code to allocate pipe numbers even if no rules are present.
  • Fixed upgrade code to remove old CA/Cert config entries that were moved/relocated.